IS 6392 Type Flanges
IS 6392 Type Flanges Manufacture
IS 6392 Type Flanges is a specification used to produce steel flanges in piping systems. These pipes are intended for service in sectors like the oil and gas industry, water, steam, and air.
The IS 6392 Type Flanges is also used to construct flanges that meet the requirements of the chemical processing industry.
The materials that may be used by manufacturers include both carbon steel and alloy steel. We are leading IS 6392 Type Flanges Manufacture in Kolkata, West Bengal, Bihar, Odisha, Jharkhand.
Though the use of said material depends on the operational temperature of the environment. In an environment whose temperature reaches a high of 450°C, carbon steel fasteners are used with IS 6392 Type Flanges.
However, if the temperature exceeds 450°C, the bolts and studs typically used would be an alloy steel. But the nuts used to fasten these bolts and studs could be produced from carbon steel.
In addition to the material, the specification for the IS 6392 Type Flanges includes other details like testing, dimensions, markings, tolerance as well as the preservation and packing of these flanges. Since these flanges are used in multiple applications, they need to have high strength, even in higher temperatures.
Carbon steels are alloys that have a higher level of carbon on their chemical composition, thus, they deliver a good performance at elevated temperatures.
Furthermore, they have high tensile properties, especially high hardness, which is useful in the oil and gas industry, where the pressure levels are high. Piping systems in the oil and gas industry carry around hydro-carbon based compounds of varying viscosity.
The viscosity combined with a high velocity of the media traveling causes high levels of pressure. The pressure is further increased if the piping system has to be terminated.
Using carbon steel or alloy steel to produce the IS 6392 Type Flanges takes off some of the pressure because the material is strong and durable.
IS 6392 Type Flanges Specification Schedule
Supplier of IS 6392 Type Flanges in India, Check Is 6392 Table 17 Flange Dimensions, IS 6392 Type Flanges Table 5 Size Chart online
| Specifications | IS 6392 Type Flanges |
| Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges. |
| UNI Standards | 6Bar 10Bar 16Bar 25Bar 40Bar |
| size range | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
| DIN Standards | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| ANSI Standards | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| EN Standards | 6Bar 10Bar 16Bar 25Bar 40Bar |
| BS Standards | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
| Flange supporting material | Gasket, Ring Joint, Flange Bolts |
| Test | Hydrostatic testing machine, Direct-reading Spectrograph, UI trasonic flaw detector, X-ray detector, Magnetic particle detector |
| Equipment | Bending machine, Press machine, electric bevelling machine, Pushing Machine, Sand-blasting machine etc |
| Flange Face Type | Flat Face, Lap-Joint Face, Raised Face, Ring Type Joint, Small Tongue, Large Male-Female, Small Male-Female, Large Tongue & Groove Flanges manufacturer and Supplier |
| Flanges Marking | All Flanges are marked as follows: Supplier or Manufacturer’s Name, Size, Class, Bore, Dimension, Material, Heat No. Or according to the customer’s request. |
