The gas Metering Valve is held attached to a piston that is held close by a spring. a fuel metering valve passes a small amount of fluid when there is no force or breaks on the pedal. The piston opens the valve and pressurized fluid is sent to the front callipers by Water Meter Valve. On commercial sites such as shower rooms, campsites, and locker rooms Water Meter Valve are used. They automatically shut off after each use and come on when the push button is handled. Water Meter Valve is another type of valve that measures liquid fuel to the gas used in a turbine during steady state operation and deceleration. We are one of leading Water Meter Valve Manufacture in Kolkata, West Bengal, Bihar, Odisha, Jharkhand, Chhattisgarh, Assam.

Similarly, Water Meter Valve features a non-hold open push button. When the push button has been pushed the air in the diaphragm is forced through the tubes. The air then opens the Air Metering Valve that allows the water to flow through the fixture.  Metering Valve Brakes are used to balance the braking force. The valve holds back fluid in the front brake until pressure overcomes the return spring back to the rear drum. When precise flow control is needed Gf Metering Valve is used as it provides a linear flow curve. Hydraulic Metering Valve is a bit different since it provides free flow in one direction and metered flow in the reverse direction.